Victron Energy Orion-Tr Smart 12/12 30A (360W) Non-Isolated DC-DC Charger
Victron Energy Orion-Tr Smart 12/12 30A (360W) Non-Isolated DC-DC Charger
Order in the next loading...
to get this item on:
loading... - loading...
Couldn't load pickup availability
Victron Energy Orion-Tr Smart 12/12 30A (360W) Non-Isolated DC-DC Charger
The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.
For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery.
The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism.
The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries.
Features Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
Fully programmable Battery charge algorithm (configurable) or fixed output. Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery.
After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged.
For lithium batteries absorption time is fixed, default 2 hours. Alternatively, a fixed output voltage can be chosen.
Remote on-off A remote on/off switch or relay contact can be connected to a two-pole connector. Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.
High temperature protected The output current will reduce at high ambient temperature.
IP43 protection When installed with the screw terminals oriented downwards.
Screw terminals
No special tools needed for installation.
Dimensions H130 x W186 x D80mm
Weight 1.8Kg
Warranty 5 Years

I install and repair electrical systems in vans. These DC-DC chargers are what I use in all my installs and in my own van as well.
Good durability, reliable, and plenty of options in the bluetooth app make this the best.
When I converted my van initially I made the mistake of fitting a cheapo dc to dc charger. It never worked correctly and recently packed up all together.
I'm pleased to say that my new Victron charger setup is performing well.
It's quite a big unit but it's very solid. The connection terminals accept up to 16mm cables.
Setup is simple via the free Bluetooth app.
It's spendier than the alternatives, but it's the best of breed and worth the price. The bluetooth monitoring through the app works flawlessly and the functionality if the device is perfect for my needs.
Good quality, good price.
Another Victron product that just works as you need it