Victron Energy Smart battery protect 65A 12V

Victron Energy Smart battery protect 65A 12V

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.

Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled.

damage the battery) or before it has insufficient power left to crank the engine.

It can be set to disconnect at several different voltages and a digital display is built in to indicate what setting has been selected. An alarm signal is also built in that can be used for an external buzzer/warning light, this alarm is triggered 90 seconds before disconnect. The battery protector unit automatically detects the system voltage (12V/24V) and has over-voltage protection built in. Continuous load rating 65A.

12/24V auto ranging

Programming made easy

Special setting for Li-ion batteries

Ultra low current consumption

Over voltage protection

Ignition proof

Delayed alarm output

Delayed load disconnect & delayed reconnect

NOTE: The battery protect can be used with all types of battery technology.

- Alarm output delay: 12 seconds

- Maximum load on alarm output: 50mA (short circuit proof)

• Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)